What Type Common Plumbing Issues You Should Be Aware Of

Digi Plumbing – The Local Plumbers  » Plumbing »  What Type Common Plumbing Issues You Should Be Aware Of
0 Comments

If you live in a home, there are a number of plumbing problems you might experience. Some of the common issues include leaks, running toilets, and low water pressure. If you have any of these problems, be sure to contact a plumber as soon as possible.

Leaks

Plumbing leaks can cause a lot of damage. Not only do they waste water, but they can also cause problems such as dampness, mold, and even structural damage to your home. If left unchecked, they can be costly to repair.

Luckily, there are some easy-to-do fixes that will fix your minor plumbing problem without having to replace the entire line. However, there are also some major plumbing issues that are far more expensive and require the services of a professional plumber.

One of the most common plumbing issues is clogged drains. This occurs when something, such as soap, hair, or foreign objects, builds up in the drain. When the pipes are clogged, water cannot flow through them. A simple drain cleaning will get rid of this issue, but it will only fix the clog temporarily.

Another common leaky plumbing problem is pipes that have been corroded. This is caused by the presence of corrosive substances inside the pipes. These substances eat away at the metal, and over time the pipes need to be replaced.

Dripping Faucets

Dripping faucets can cause a lot of problems. These leaks can lead to water damage, mold, and mildew. They can also be difficult to clean. Having them fixed by a professional can help you identify the problem and prevent it from occurring again.

The first step to fixing your dripping faucet is to turn off your water supply. This will prevent the water from damaging the sink area. Next, you will want to check the valve seat and washers. If there are any of these parts that are worn out, you will need to replace them.

In addition to checking the seals and washers, you can also clean the faucet. This will remove any sediment that has collected. This sediment is corrosive and can cause the faucet to leak. You can clean the sink with a mixture of white vinegar and water. This will remove any stains from the faucet and also prevent future drips.

The best way to avoid a dripping faucet is to ensure that the faucet is installed correctly. If you do not know how to do this, a plumber can help you.

Running Toilets

Running toilets are a common plumbing problem and can be frustrating and expensive to fix. But there are things you can do to prevent them from happening. One of the most important is to check the level of water in the tank. If there is too much water in the tank, the flapper won’t be able to close properly.

Another way to prevent water from spilling out of the toilet is to have the float ball adjusted. It should be positioned at a lower height than the overflow tube. If it doesn’t, it could cause the toilet to overflow.

One of the most commonly known causes of a running toilet is a broken flapper. This part is usually held in place by hooks on the overflow tube. If the hooks are broken or the chain is too long, the flapper won’t seal properly.

Luckily, you can fix the faulty flapper with a new replacement. Just make sure to buy a flapper of the same size, shape, and style.

If you aren’t comfortable tackling this project, you can hire a plumber to help you. A qualified plumber can easily repair a running toilet, but they can also identify a more serious issue.

Low Water Pressure

Low water pressure is a common plumbing issue that can affect your entire home or just one fixture. Fortunately, there are a number of ways to solve it, from changing your daily routine to replacing fixtures. If you’re not sure which way to go, you may need to contact a professional plumber to get the job done.

Old pipes are a major culprit behind low water pressure. When the pipes are corroded, they can cause leaks, sediment buildup, and even contamination. They can also impede water flow, which is especially true if you live in an area that’s extremely cold.

The most obvious way to combat the problem is to clean out your water pipes and fixtures. This will eliminate clogs, which can reduce pressure. It’s also a good idea to install a pressure regulator to control the amount of water flowing through your house.

If the issue isn’t easily fixed, you may need to replace the faulty supply lines. These are pipes that lead from your home to the street. The pipes are usually made of brass or copper, which can last up to 50 years.

Running Toilet

Running toilets can be a very annoying and frustrating plumbing problem. They can waste hundreds of gallons of water per month. They also can cause a lot of damage to your floors. You should call a plumber if you have a running toilet.

The most common causes for a running toilet are a faulty flapper and an overflow tube. Fortunately, there are several steps you can take to fix the problem.

First, you need to check the overflow tube. An overflow tube is an open-ended tube located in the center of the tank. If you notice any leaks or colored water in your toilet bowl, the tube is likely leaking. You can clip the tube to one side of the overflow opening or trim the tube to fix this problem.

Second, you should make sure the fill valve is working properly. A faulty flapper can be fixed by simply replacing it with a new one. You can buy replacements at a hardware store.

Finally, your handle may be faulty. If the handle does not close completely, you will have to fix it. This can be easily done by removing the pins at the bottom of the overflow tube.

Faulty Water Heater

A faulty water heater can lead to an unexpected leak, freezing cold showers, or other plumbing problems. The best thing to do when you notice a problem with your water heater is to call a plumber for emergency repairs. Leaving a problem unattended will only make it worse.

The first step in troubleshooting a faulty water heater is to check for any loose or damaged parts. If a part is loose, it may need to be tightened. This includes the dip tube, which sends fresh cold water to the bottom of the tank. If the dip tube is cracked, it can allow incoming cold water to mix with the hot water.

Other problems with a faulty water heater include a buildup of sediment in the water supply. This can clog faucets and reduce the flow of water. It can also cause corrosion in the tank and unexpected ruptures.

Another common issue with water heaters is a blown out pilot light. Gas water heaters require a pilot light to ignite the gas. The pilot light is a safety device that is activated when the thermostat drops below a certain level.

Jammed Garbage Disposal

A jammed garbage disposal is an annoying problem. It can cause water to back up and sometimes even burn out the motor. However, there are a few simple fixes for this issue.

First, you need to turn off the power at the circuit breaker. Next, unplug the garbage disposal. If you have to remove the unit to do this, use a wrench. If you can’t, you can use tongs or needle-nose pliers.

When you have gotten the disposal running again, try short bursts to clear the obstruction. This should work for most jams. If not, the disposal may require professional repair.

If the garbage disposal is still not working, you can try resetting the circuit breaker. You will need to do this at the main service panel. You may also have to call a plumber.

To reset the flywheel, you will need an Allen wrench. A small opening in the bottom of the unit allows you to access this tool. You should be able to turn the flywheel all the way around.

Sewer System Backup

Sewer system backup is a common plumbing issue that can cause serious water damage. It can also be an unsafe hazard for the inhabitants of your home. When this occurs, you need to call a professional plumber immediately.

There are many causes for a sewer backup. It can be caused by a cracked line, clogged drains, or tree roots. But there are also some simple steps you can take to prevent this from happening.

The best way to prevent a sewer backup is to keep your plumbing system clean and well-maintained. This is a great time to contact a professional plumber to inspect your drains. You may even have a home insurance policy that covers this type of problem. If you are unsure, ask your provider for a referral.

The biggest cause of a sewer backup is a clogged pipe. When this happens, dirty water comes up through sinks and toilets. Grease and paper products are two major sources of clogs. if you are looking for best plumbers then hire plumbers in chatsworth

Another symptom of a clogged sewer line is gurgling. When this happens, it is an indicator that there is a larger problem. When a clog is severe, you may be unable to use your bathroom.

Candu Plumbing of Chatsworth

Candu Plumbing of Chatsworth

9726 Variel Ave, Chatsworth, CA 91311

(818) 492-3067